Edhard MKS Volumetric Dosing System

Description

All parts Shown in the images are included.
1 FHP 18qt hopper
1 FHP 6 qt hopper
"
FHP-Series filler units* are gear-type pumps constructed in polycarbonate and are available in single outlet configuration with 6-quart (5.5 liter) or 18-quart (17 -liter) capacity hoppers. The FHP-Series was designed as an alternative to the FS-Series by offering a similar high-pressure capability at a lower cost. This series is capable of metering a wide range of viscous products, with a high degreee of accuracy. the FHP- Series is compatible with P**, PS and PV-Series"
2 F series gear bases (1 never used)
1 F series 6qt hopper
"
These filler units* are molded in clear, FDA approved polycarbonate. They are available with 6-quart (5.5 liter) or 18-quart (17-liter) capacity hoppers and feature single or double outlets. F-Series filler units can perform a wide range of dispensing functions from filling pastries to depositing one product onto another. A large variety of specialized spouts adapt the filler units to fill donuts, eclairs, croissants and other pastries. They dispense smooth batters, layer toppings, deposit butter and cream cheese onto bagels and rolls and dose other semi-liquid products, quickly and efficiently. The F-Series filler units can be used with P, PS and PV-Series
1 Edhard F-3390 SPOUT-CUPCAKE 4-1/4 (108MM) SP
1 Edhard F-3405 SPOUT - CUPCAKE 3-1/4 (82.5MM
1 Foot switch
2 pairs standard filler spouts
2 pairs long filler spouts
"They say about the PS series MKS power base:
The PS-Series power base offers the same reliability and maintenance-free design as the
P-Series
with the same controls and operating functions.
The added benefit
of the PS-Series power base is its 1/8 hp motor. The availability of higher power broadens the range of products that it can dispense. It is best suited for use with
FHP-Series
,
FS-Series
and
RP-Series
filler units.
Normal Cycle:
The amount of product to be dispensed can be preset at the digital keypad. As the trip arm is pressed, the unit will cycle once to dispense the preset amount, then stop and reverse.
Reverse:
The reverse is needed to pull product back after a dispensing cycle is completed, which prevents dripping. Reverse can be adjusted to meet specific requirements.
Automatic Cycle:
This function eliminates the need to continually press the trip arm during multi-cycle applications. In ths function, the amount dispensed and waiting time can be set to suit a specific need. Automatic cycling eliminates operator fatigue and improves productivity in repetetive, long-running jobs.
Continuous Dispensing:
When selecting this function, the operator or a remote-triggering device, such as a photoelectric switch, determines the start and stop of the pumping action. This function is useful when a continuous stream of product is deposited on a conveyor or manually via a hose attachment.
All power bases can be triggered manually by a trigger switch (standard on
P
, PS,
PV
and
PT
power bases), our foot switch or hose assembly (
accessories
), or your own photoelectric switch."